Yamaha HTR-5830 - Manual (Page 31)

PLAYBACK
Selecting a sound field program
You can enhance your listening experience by selecting
sound field programs. For details about each program, see
pages 30 - 33,
o o o o
O' u o o
¿2jn Ò o
— 2,3
1
Press AMP.
Press one of the sound field program
buttons on the remote control to select the
desired program.
The name of the selected program appears on the
front panel display.
Jii2Z ROCK ENTOVdWEtir
PROGRAM
Front panel
O © © <3)
MUSIC TV THTR Movie-
or © © ©
tH/DTS MIGHT S.1/5.1 ____
© © © ©
Remote control
V-AUX DIV/CBL , , WD/OW? TUMER CD
After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs If available.
Example; Pressing MOVIE 2 repeatedly
switches the sub-program between
“Adventure” and “General”.
ROCK tUTEHriJHWEUr
© © © ©
MUSIC TVTHTF! MOVIE 1
* or © © ©
m/DTS NIGHT S.1/5.T
© ©
Front panel Remote control
«Ms VCR V-AUX DW/CBL D3AD MO/Ct» TUNER CD
'JCH.UME
- H
s”!: 1
b Ì ” ! '».! ’a, ! i *n. *n.i
Notes
• '1 here .are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
fomiat and not all sub-programs can he used with all input
signal formats.
• You caimot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect sound field
programs. Minimize sound reflections in your room to
maximize the effect created by the program.
• When you select an input source, this unit automatically
selects the last sound field program used with that source,
• When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the sound field program (No. 7-9)
automatically switches to the appropriate decoding program,
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the front and surround speakers.
Sound can only be lieard from the center speaker. (If “I A
CENTER” on the set menu is set to NONE, tire center chaimel
sound is output from the front speakers.)
Select a program based on your listening preference. Program
ntimes are just for reference.
27