Editing sound field parameters, Changing parameter settings, Note – Yamaha HTR-5830 User Manual

Page 55: 1 press amp, 3 press /\ / to select the parameters, Press < / > to change the parameter value

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EDITING SOUND FIELD PARAMETERS

Changing parameter settings

I lie iiiiliiil soiiinl llelil |'i

with an excellent listening experience as they are. But you

can create an original listening environment by altering

--onie settings.

Note

• The editable parameters vary depending on the sound field

program you select. Refer to the explanation for the parameter.

0 Repeat steps 2 through 4 if you wish to alter

other parameters.

Note

• You cannot change parameter values when “OPTION 2 MEM,

GUARD” is set to “ON”. If you want to change the parameter
values, set “OPTION 2 MEM. GUARD" to “OFF” (see page

45),

=1 =j □ eZH

.■0;a-.-.GS3.

Press AMP.

Select the sound field program you want to
adjust.

MUSIC

m/DTS

TVTHTI

MIGHT

HOCK EUrtFlBlilMEIjr

MUSIC TVTKTR MOVIE1 MOVIES

m/DTS MIGHT 8.1/5.t

i^OVIEI

Press /\ / to select the
parameters.

Press < / > to change the
parameter value.

If you press and hold to change the parameter value, the
front panel display automatically stops at the factory preset

parameter momently.