Yamaha HTR-5830 - Manual (Page 32)

PLAYBACK
m Selecting PRO LOGIC or PRO LOGIC II
You can listen to 2-channel sources decoded into four
discrete channels by selecting PRO LOGIC or five
discrete channels by selecting PRO LOGIC II in program
No. 9 (refer to the hsi on page O i.
-O' u u u
1
Select a 2-channel source and start playback
on the source component.
2
Press AMP. AMP
3
Press DO/DTS.
m/DTS
VCR V-AUX DIV/CBL D№ TUWER , CO
The display cycles as follows each time you press DO/
DTS:
PRO LOGIC^PRO LOGIC Enhanced-^PRO LOGIC II
Movie-^PRO LOGIC II Music->PRO LOGIC-^.,.,
• You can select PRO LOGIC. PRO LOGIC Enhanced. PRO
LOGIC II Movie, and PRO LOGIC II Music by pressing
PROGRAM <] / D» on the front panel repeatedly.
■ Playing Dolby Digital EX or DTS ES
material
Press 6.1/5,1 to turn on the Dolby Digital -l- Matrix 6.1 or
DTS
-I- Matrix 6.1 decoder.
S, 1/5.1
( r i a l
(Example)
VCR V-AUX DIV/CBL D\JD WO/OW? TUNER CD
WSTiK
loj
! ! ■y ."*1 g
agli S i"*l i “
The display changes AUTO-yMatrix 6.1—/OFF each time
6.1/5.1 is pressed.
AUTO:
Matrix 6.1:
OFF:
Notes
Automatically switches Dolby Digital -I-
Matrix 6.1 and DTS -I- Matrix 6.1 depending
on the signal. Virtual surround back speaker
does not work for 5.1- channel sources.
Produces 6-channel playback of the input
source using the Matrix 6.1 decoder. The
virtual surround back speaker can be used
when playing a 5.1-channel source.
Virtual surrountl buck speaker does not
work.
Some 6.1-channel compatible discs do not have a signal (flag)
that this unit can automatically detect. Select “Matrix 6.1" to
play these kinds of discs with 6.1 -chaimel sound.
6.1 -channel playback is not possible even if you press 6.1/5.1
in the following cases:
- When effects are turned off
- When the source connected to the 6CH INPUT jacks is
being played.
- When the unit is reproducing a Dolby Digital KARAOKE
source.
- When headphones are connected to the PHONES jack.
The 6.1/5.1 setting resets to AUTO wlien you turn the unit
power off.
28