Yamaha HTR-5830 - Manual (Page 43)

RECORDING
Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .
ibi b) ni-bi ■
2
—
:0. C3
r. ^ n
L~; r.'.’ r::i Ó
EZ: I : [ZD o
Qj L.J
Notes
• Jo a test recording before you start an actual recording.
• When this tmit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, ‘SP LEVEL"
(page 23 ) and programs does not affect the recorded material.
• A source connected to the 6CH INPUT jacks of this unit
cannot be recorded.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR I OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, efc. Recording of copyrighted material
may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
CD MD/CD-R TUWER
O O O
or
OMO D-TV/CBL VCR V-AUX
Ó o
Front panel Remote control
3
start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
39