Panasonic KX-FP101 - Manual (Page 75)

Error Messages
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & Remedy
CALL SERVICE
• There is something wrong with the unit. Contact our service personnel.
CHECK COVER
The cover is open. Close it.
CHECK DOCUMENT
• The document is not fed into the unit properly. Reinsert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try again
(p.
86). If the problem remains, adjust the feeder pressure (p. 83).
CHECK FILM
• The film cartridge is not installed. Install it (p. 84, 85).
CHECK MEMORY
• Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
CHECK PAPER
The recording paper is not installed or the unit ran out of paper. Install paper
and press [STARt/SET/COPY ] to clear the message.
The recording paper is not fed into the unit properly or has jammed near the
recording paper entrance. Clear the jammed paper and press
[START/SET/COPY ] to clear the message (see “When paper has jammed near
the recording paper entrance” on page 82).
Do not install folded or heavily curled paper in the paper tray.
FAX IN MEMORY
• The unit has a document in memory. See the other displayed message
instructions to print out the document.
FAX MEMORY FULL
• Memory is full of received document due to a lack of recording paper or a
recording paper jam etc. Install paper or clear the jammed paper.
• When performing memory transmission, the document being stored exceeds
the memory capacity of the unit. Transmit the entire document by using manual
or automatic transmission.
X
o
■o
FILM EMPTY
The film is empty. Replace the film cartridge with a new one (p. 84, 85).
The film is slack. Tighten it (see step 4 on page 85) and install again.
FILM NEAR EMPTY
• The remaining film can print about 15 pages of letter size document. Prepare a
new film cartridge (p. 12).
FREE FILM EMPTY
• The free starter film is empty. Replace the film cartridge with a new one
(p. 84, 85).
JOG-DIAL FULL
There is no space to store new stations in the JOG DIAL directory. Edit or erase
unnecessary stations (p. 33, 34).
LOADING ERROR
♦ A loading error occurred while receiving data from FaxSav. Contact FaxSav
at 1-888-332-9728.
MEMORY FULL
♦ When making copy, the document being stored exceeds the memory capacity
of the unit. Press [STOP] to clear the message.
MODEM ERROR • There is something wrong with the modem circuit. Contact our service personnel.
For assistance, call 1-800-435-7329.
(continued)
75