From memory, Transmitting document from memory, Sending faxes – Panasonic KX-FP101 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
From memory
The unit is able to scan and store document into memory, and then transmit the stored document.
The memory capacity is approx. 25 pages based on the CCITT No. 1 Test Chart in standard resolution.
For the CCITT No. 1 Test Chart, see page 93.
Transmitting document from memory
1
2
3
Insert the document FACE DOWN.
Enter the fax number using the dial keypad.
Press [MEMORY SEND].
• The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the document.
• The amount of memory used will be shown as a
percentage on the display.
Display:
PAGES=01
05
Amount of memory used
■n
Q1
O
TJ
*<
Note:
• The stored document will be automatically erased after transmission.
• To cancel the memory transmission, press (STOP] during or after scanning the document.
• If you select the fine, super fine or half tone resolution, the number of document that can be sent will
decrease.
• If the stored pages exceed the memory capacity, the transmission will be canceled.
• If the other party’s fax number is written on the document, you can enter the number by referring to the
document before inserting it.
47