Panasonic KX-FP101 - Manual (Page 37)

Sending Faxes
Sending a fax manually
1
2
3
4
5
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document {up to 15 pages) FACE DOWN
until a single beep is heard and the unit grabs the
document.
Display: STANDARD
If necessary, press [RESOLUTION I repeatedly to
select the desired setting {see below).
Press ( monitor ] or lift the handset {This step is
optional. See note.).
TEL=
Dial the fax number.
Example:
tel =5678901
When a fax tone is heard:
Press (START/SET/COPY ], and replace the
handset if using it.
OR
When the other party answers your call:
Lift the handset if using the monitor and ask them
to press their start button. When a fax tone is
heard, press your (START/SET/COPY 1 and replace
the handset.
Document guides
Document
feeder tray
CONNECTING
(STOP)
(MONITOR)
[REDIAUPAUSEl
[START/SET/COPY]
Note;
• If you cannot send a fax, confirm the
problem by printing a journal report {p. 87)
and see page 74 to solve the problem.
• Performing step 5 allows you to identify any
possible problems in sending a fax. For the
parties with whom you have experienced no
problems, you can skip step 5. Dial the fax
number and press (START/SET/COPY].
to
o
•a
<
To feed more than 15 pages at a time To select the resolution
Select the desired resolution according to the type
of document.
For printed or typewritten
originals with normal-sized
characters.
Insert the first 15 pages of the document. Add the
extra pages {up to 15) before the last page is fed
into the unit.
To redial the last number
Press (REDIAUPAUSE).
• If the line is busy, the unit will automatically redial
the number up to 5 times.
• During redial, the following will be displayed.
Display: WAITING REDIAL
• To cancel redialing, press (STOP).
To stop transmission
Press iST^.
To eject the document, press [STOP] again.
STANDARD
FINE
T
SUPER FINE
i--------
I- HALF TONE
For originals with
small printing.
For originals with
minute printing.
For originals containing
photographs, shaded
drawings, etc.
• Using the fine, super fine or half tone setting will
increase the transmission time.
• If the resolution setting is changed during
feeding, it will be effective from the next sheet.
• The super fine resolution only works with other
compatible fax machines.
37