Sending a fax using the one-touch dial, Jog dial, If your unit does not send a fax – Panasonic KX-FP101 User Manual
Page 38: Fax auto redial, Sending faxes, Standard, Fax= connecting, Waiting redial
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
Sending a fax using the One-Touch Dial................... ^
Before using this feature, program the desired names and telephone numbers into the One-Touch Dial (p. 30).
1
2
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document (up to 15 pages) FACE DOWN
until a single beep is heard and the unit grabs the
document.
Display;
STANDARD
If necessary, press (RESOLUTION I repeatedly to
select the desired setting (p. 37).
For stations 1-3
Press the desired One-Touch Dial key.
For stations 4-6
Press (LOWER], then press the desired
One-Touch Dial key.
Example:
FAX=
CONNECTING.
• The unit will start transmission.
Helpful hints:
• You can confirm the stored items on the display (p. 35)
or on the telephone number list (p. 87).
• You can use the JOG DIAL directory to select the
station name instead of using the One-Touch Dial
keys. Rotate [JOG DIAL] until the desired name is
displayed, then press (START/SET/COPY ].
• The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 51).
Document guides
Document
feeder tray
[ START/SET/COPY ]
One-Touch
Dial keys
[LOWER]
[JOG DIAL]
If your unit does not send a fax
Verify that the number dialed is answered by the
other party’s machine.
1. Press [MONITOR].
2. For stations 1-3
Press the desired One-Touch Dial key.
For stations 4-6
Press [LOWER], then press the desired
One-Touch Dial key.
38
Fax auto redial
If the line is busy or there is no answer, the
unit will automatically redial the number up to
5 times.
• This feature is also available for;
— sending faxes using the JOG DIAL
directory (p. 39), and
— delayed transmission (p. 46).
• During redial, the following will be displayed.
Display:
WAITING REDIAL
To cancel redialing, press [STOP].