Panasonic KX-FP101 - Manual (Page 17)

Setup
Paper tray
Insert the two tabs on the paper tray into the slots on the
back of the unit.
• Do not place the unit in areas where the paper tray
may be obstructed by a wall, etc.
Paper stacker --------------
(not included)
To stack printed paper, a paper stacker is available as an accessory. To order, see page 12.
^ Remove the shipping tape from the paper stacker.
Lift the front of the unit and hold the aluminum
sheet up to prevent it being bent by the paper
stacker while inserting the paper stacker into the
side slots.
Confirm that the paper stacker is locked into the
center slots and slide back.
Slide the paper stacker forward until it stops.
■D
“1
(D
■o
a
S
o’