Panasonic SC-DV150 - Manual (Page 55)

Selecting rating level
B
Î
■£
0
Tï
s
DVD
This is to disable the playing of specified DVDs which are unsuitable
for children.
• Some DVDs are encoded with specific rating level. If the rating level
of the disc is higher than that preset in the setup operation, playback
of the disc wilt be prohibited.
by remote control only
At the initial settings screen page 55)
® Press [T] or [ A ] to select “2 Ratings”.
©Press [SELECT].
0 All DVDs can be played
back. (Factory setting)
® DVDs for general
audiences/children
can be played back.
(DVDs for adults
are prohibited.)
© DVDs for children can be
played back, (DVDs for
adults/general audiences
are prohibited.)
0 Playback of all DVDs is
prohibited.
0 Press [▼] or [ A ] to select the desired level.
©Press [SELECT].
When level 7 or lower is selected
0 Input a 4-digit number (password) by numer­
ic buttons.
©Press [SELECT].
The lock symbol appears closed to show the rating is locked.
rii Press [SELECT].
Setting is finished and the initial settings screen is displayed.
The rating is locked. Any discs whose rating is higher than the setting
cannot be played back unless the correct password is entered.
To change the settings
1. Select “2” with the cursor but­
tons at the initial settings
screen and press [SELECT],
2. Input 4-digit password and
press [SELECT].
3. Select the preferred item with the cursor buttons and press
[SELECT].
4. 1 Unlock Player
Press [SELECT],
2 Change Password
Enter a new 4-digit password and press [SELECT].
Press [SELECT] again,
3 Change Level
Select a level and press [SELECT].
4 Temporary Unlock
Select to temporarily unlock the player to view the DVD in the
play position immediately after changing the ratings. Select
before exiting the menu.
Press [SELECT].
5. Select “0 Exif and press [SELECT] to exit.
Selecting menu language m
m
The language of the On-Screen message is changed.
At the initial settings screen (•• page 55)
©Press [ T ] or [ A ] to select “3 Menu Lan­
guage”.
©Press [SELECT].
0 Factory setting
$ 0
imm'i. 2
l«L S „
1«.
! 4';:.
1
I
j: Press
©Press [ T ] or [ A ] to select the desired lan­
guage.
©Press [SELECT].
Setting is finished and the initial settings screen is displayed.
HQT5052