Panasonic SC-DV150 - Manual (Page 16)

■:.-'-,v- ■■■■■■.............■■■■■■•■ ........:;
-DIRECT OPEN-
lüiscTt fpiggll iDigira íois^ iBÍ5gsl
H ............ ............ .
í;..: ............... ..................... ..................... T;' '!■"
n O r (. ( -í"’
0 Label must
face upward.
OPEWCLOSE
|^^3^^EZ!ZZH3E¡EHI
8cm
X
I2cm
Always stop the changer before loading or changing discs. You can­
not change discs while a disc is piaying.
II Press [DIRECT OPEN, DISCI ]-[DISC5], which­
ever you want to open.
Q Insert a disc in the tray.
Repeat steps Q-Q to load the other trays.
Q Press OPEN/CLOSE].
if "DVD” is selected as the input source and a DVD or video CD
with PBC is inserted, the Automatic Play function is activated.
{Refer to the foilowing article)
Disc indicators (DISCI-DISCS}
These indicators iight green to show a tray is in the playing position,
whether it is loaded or not.
To prevent damage
Always observe the following points.
•Load only 1 disc per tray. Q
•Load discs as shown in figure. E
An adapter is not needed with 8 cm discs (singles).
•Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
•Do not move the system while trays are opening/closing, or when
loaded.
Always unload all trays before moving the system.
•Do not put anything except discs in trays.
• Do not use cleaning discs or discs which are badly warped or
cracked.
• Do not use discs with poorly attached labels or stickers. Adhesive
protruding from underneath stickers or left over from peeled off
stickers can cause the system to malfunction.
• Do not use irregular shaped discs. B
Automatic Play function
Most of DVDs and video CDs with PBC start playing if any of the
following operations is performed;
•[A OPEN/CLOSE] is pressed to close the tray after inserting a disc.
•The power is turned on when a disc is in the changer and the input
selector is set to DVD.
•“DVD" is selected with {INPUT SELECTOR] on the unitor [DVD] on
the remote control when a disc Is in the changer.
Press [■] to stop the disc if piay starts while setting the timers or
preparing to make a recording.
wt
.§
I
I
9
RQT5052