Panasonic SC-DV150 - Manual (Page 12)

. J . . .
*■■■.■■'. •.. ’ íV- .V' ... ■.■(■■,...; ■
This is a 24-hour display dock.
The figure shows how to set the time for 16;25.
n Press [(!)/)] to turn the unit on.
ra ©Press [CLOCKH-IMER, -DEMO] to show
“CLOCK’*.
Every time you press the button;
CLOCK-^© PLAY^© REC-*Originai display
Within 5 seconds;
©Press [SET].
Q ©Press [TUNING
(v
or
a )]
to set the present
time on the display.
The time display can be changed in one minute units by tap­
ping the buttons, and quickly by holding down the buttons.
©Press [SET].
The display will return to the previous display after about 3 sec­
onds.
To display the clock
Press [CLOCK/riMER, -DEMO].
The time is shown for about 5 seconds.
The time is shown constantly when the unit and ECO mode are off.
Turn ECO mode on to reduce the amount of energy consumed while
the unit is in standby mode.
This mode is set to on at the time of purchase.
NORMAL (off) ECO (on)
Display Clock display, etc. Blank
Power consumption
in standby mode 11 W •0.6W(ForU.K.,
Europe,
Australia and
New Zealand)
• 1.0W
(For others)
The demonstration is shown if DEMO is on, regardless of the condi­
tion of the ECO mode. Turn DEMO off if ECO is used.
Turning ECO on and off:
Press [(!)/!] to turn the unit on.
Press [ECO].
The current ECO mode is displayed.
Press again to change the mode.
The display changes each time the button is pressed:
NORMAL (off):;!:ECO (on)
When ECO is on:
When the power is switched off, standby indicator lights, but the dis­
play panel remains blank.
When the unit is off, the mode can be switched from NORMAL to
ECO, but not the other way.
.1
I
I
RQT5052