Panasonic SC-DV150 - Manual (Page 14)

© (When you select “PRESET’)
Í ML
TUNING MODE
N/' TUNING /s
1
© (When you select “MANUAL")
R l\l Ü R Ú
7
I?' ..;,,,-,-,
© Preset channel
(When you select “PRESET)
^ I f n I
) I' U Í-
I / l~¡ / T7 '
'( O O jj ,
i
R
I
This example shows how to tune in FM stations.
Preparation
Press I(!)/l] to turn the unit on.
Press [TUNER/BAND] to select the desired
band.
Each time you press this button; FM-«—> AM
Press [TUNING MODE] to select “PRESET” or
“MANUAL”.
Each time you press this button; MANUAL<—>PRESET
•Select “PRESET when stations are preset (^ page 14).
•Select “MANUAL” when stations are not preset.
|c| Press [TUNING
(v
or
a )]
to tune in the desired
broadcast,
“STEREO” lights when an FM stereo broadcast is being re­
ceived.
‘TUNED” lights when you precisely tune in a broadcast station.
Automatic scanning (when you select “MANUAL” in
step Q):
Press and hold [TUNING (v or
a
)] until the displayed frequency
starts to scroll.
•The scrolling of the frequency will automatically stop if a fre­
quency is located during the tuning process.
•When there is excessive interference, automatic scanning
may not function.
To cancel automatic scanning, press [TUNING (v or a )] once
again.
Q Adjust the volume.
For tuning by remote control (when you select
“PRESET’in step H above):
Specify the channel you want writh the numeric buttons.
To select a two-digit channel:
Press [5:10/-/--] and then the two numbers you want within 10 sec­
onds or so.
If noise is excessive in the FM stereo mode El
Press [FM AUTO/MONO].
The sound reception mode switches to “MONO” (monaural) and
“MONO" lights.
The sound will then be heard in monaural,
if the broadcast signal is weak, or if there is a large amount of interfer­
ence, you will get a clearer sound.
To cancel the “MONO” mode, press the button again.
When “MONO” Is off
Use this setting for normal listening. Both stereo and monaural
sounds can be heard as they are.
•“MONO” is cancelled when the frequency Is changed.
•Stations can be preset in monaural. Carry out presetting manually
(^ page 14).
U)
e
■I
s
I
I
s
RQT5052