When “4:3” is selected when “16:9” is selected, 1 standard (direct view tv), 2 crt projector – Panasonic DVD-A320U User Manual
Page 35: 3 lcd projector, 4 projection tv, For your reference, 1 lpcm 96k->48k, 2 dolby digital, 3 dts, A, t)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Selecting TV screen type
Selecting digital output
Select the TV aspect, conventional size screen (4:3) or wide
screen (16:9), and the TV type according to your TV set.
1
At the initial settings screen (on page 30)
Tilt the joystick
(A, T)
to select “6 TV As
pect” and press SELECT.
m.<
Select your TV aspect
|~1 4:3
□
2 1 6 : 9
□
Press RETURN to cancel
2
Tilt the joystick
(A,
▼) to select the TV as
pect and press SELECT.
1 4:3:
Select when a conventional TV set is connected.
(Factory preset)
2 16:9:
Select when a wide-screen TV set is connected.
3
Tilt the joystick
(A,
▼) to select the TV type
and press SELECT.
When “4:3” is selected
When “16:9” is selected
The following TV types can be selected in both cases.
1 Standard (Direct View TV):
Select when a standard TV (Direct view) is connected.
(Factory preset)
2 CRT Projector:
Select when a CRT projector is connected.
3 LCD Projector:
Select when a LCD projector is connected.
4 Projection TV:
Select when a projection TV is connected.
Setting is finished and the initial settings screen is displayed.
Also refer to “Common procedures" on page 30.
For your reference:
•For further details on the images which appear on the TV
screen (aspect ratios of the screen), see page 42.
Select the digital output to be output from the optical/coaxial
digital audio output connector of the player.
1
At the initial settings screen (on page 30)
Tilt the joystick
(A,
▼) to select “7 Digital
Audio Output” and press SELECT.
Digital Audio Output"
h LPCM96k-¥ir
2 Dolby Digital
3 dts
0 Exit
No
Bitstream
PCM
2
Tilt the joystick
(A,
▼) to select the item
and press SELECT.
1 LPCM 96k->48k:
To select whether digital audio converted to 48 kHz/
16 bit is output from the optical/coaxial digital audio
output connector or no digital audio is output during
playback of DVDs recorded in 96 kHz Linear PCM.
(If the DVD is recorded in 48 kHz Linear PCM, digital
audio converted to 48 kHz/16 bit is output irrespective
of the setting.)
2 Dolby Digital:
To select the signal format (Bitstream or PCM) to be
output from the optical/coaxial digital audio output con
nector during playback of DVDs recorded in Dolby Dig
ital (AC-3).
3 dts:
To select the signal format (PCM or Bitstream) to be
output from the optical/coaxial digital audio output con
nector during playback of DVDs recorded in dts.
* *
(Continued on the next page)
*3
Oi
CO
35