Panasonic DVD-A320U - Manual (Page 30)

Joystick/
SELECT
RETURN
Numeric
buttons
Initial settings
Once the intial settings have been completed, the player can
always be operated under the same conditions (especially
DVDs).
The settings will be retained in the memory, until the settings
are changed, even after switching to standby mode.
Common procedures
1
Press ACTION in the stop mode.
r
O <1 D isc Languages_________________________1
O < 2 Ratings Level Sif ]
aoiS Menu Language, Eng!ish__ J
™iC4,On-Screen Messages
<■1^5 FL Display
Bright _ \
TV Aspect ’ 4:3' ' j
tW-':7 Digital Audio Output
WL<8~Speaker Setting ~
<9 Other,^Settings____ _ ^ ^ _____ ^
<0,Exit_______________ -----------—J
2
Tilt the joystick (A, ▼) to select the item
and press SELECT.
Each screen for setting the value is displayed.
1 Disc Languages (see page 31)
2 Ratings (see page 31)
3 Menu Language (see page 33)
4 On-Screen Messages (see page 33)
5 FL Display (see page 34)
6 TV Aspect (see page 35)
7 Digital Audio Output (see page 35)
8 Speaker Setting (see page 37)
9 Other Settings (see page 39)
3
Tilt the joystick (A, ▼) to select the setting
and press SELECT.
•Some items require additional steps. (See the respec­
tive page.)
Setting Is finished and the initial settings screen is displayed.
To cancel during setup operation
Press RETURN or select “0”. (The previous screen Is dis­
played.)
To clear the initial settings screen
Tilt the joystick (A, ▼) to select “0” and press SELECT.
(Pressing ACTION or RETURN also clears the initial settings
screen.)
Note
•After the player is set to the “Lock AH” setting in “2 Ratings",
none of the initial settings, including “2 Ratings”, can be
changed if a DVD is left inside the player. In this case, re­
move the disc, and unlock the player.
For your reference:
•The numeric buttons can also be used instead of the joystick
(A, ▼) for selecting items or values. Pressing SELECT is not
necessary.
30