Initial settings, Selecting digital output el, 7 at the initial settings screen – Panasonic DVD-A105U User Manual
Page 76: Selecting digital output, O o o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENGLISH
Initial settings
Selecting digital output El
Select the digital output to be output from the optical/coaxial
digital audio output connector of the unit.
7 At the initial settings screen
Press A/V to select “7 Digital Audio Out
put” and press SELECT.
Digital Audio Output
(SO
|1
LPCM (DVD) Off
I
CS3
2 Dolby Digital Bitstream
OD
m.
ûûû
vW_
0 Exit
2
Press A/T to select the preferred item
(1 or 2) and press SELECT.
When “1 LPCM (DVD)” is selected
Off:
Only linear PCM of 48 kHz/16 bit is output from
the
digital
audio output
connector.
During
play
back of the DVD recorded in the linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, no digital audio is
output. (Factory preset)
PCM: During playback of the DVD recorded in the lin
ear PCM of 48 kHz/20 bit/24 bit or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
{Digital
output
of
PCM
audio
is
restricted
to
48 kHz/16 bit or below for copyright protection.)
When “2 Dolby Digital” is selected
Bitstream: Dolby Digital (AC-3) bitstream (2ch-5.1ch) is
output. (Factory preset)
PCM:
PCM (2ch) of 48 kHz/16 bit is output.
O Press A/V to select the preferred value at
each screen and press SELECT.
The screen illustrated in step 1 is displayed. Press
A / T
to
select “0” and press SELECT to return to the initial settings
screen.
For your reference:
• Make settings as shown in the table E depending on the kind of
amplifier that is connected to the optical/coaxial digital audio output
connector.
"'Audio output from the unit’s audio output connectors is converted to
48 kHz/16 bit in addition to audio trom the digital audio output
connector.
To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, con
nect the amplifier or decoder directly to the audio output connectors,
not to the digital audio output connector, [Select “Off at the
“1 LPCM (DVD)”.]
"^When connecting an amplifier (with an optical/coaxial digital input
connector) which does not contain the Dolby Digital (AC-3) decod
er, be sure to select “PCM”. If “Bitstream” is selected, any attempt
to play DVDs may cause such a high level of noise that it may be
harmful to your ears and damage your speakers.
76
\
Also refer to “Common procedures of initial settings” on
I page 64.
(ZD
CD
■STOP H^STIILPAUSE »PLAY
CD
^ D 1 2 3 O Q o 4 5 6 o o o Recommendable connected LPCM (DVD) Dolby Digital No amplifier is connected Off Bitstream AV amplifier (with digital audio input connector) without Dolby Digital decoder PCM* *' PCM*2 AV amplifier including Dolby Digital decoder PCM*' Bitstream Type d’amplificateur à raccorder Réglage recommandé LPCM (DVD) Dolby Digital Aucun amplificateur raccordé Non Bitstream Amplificateur AV (avec connecteur d’entrée audio numérique) sans décodeur Dolby Digital PCM*' PCM"2 Amplificateur AV équipé d'un décodeur Dolby Digital PGM*' Bitstream m Tipo de amplificador que va a ser conectado Ajuste recomendado LPCM Dolby Digital No está conectado un amplificador No Bitstream Amplificador AV (con conectore de entrada de audio digital) sin descodificador Dolby Digital PCM"' PCM"2 Amplificador AV incluyendo descodificador Dolby Digital PCM*1 Bitstream
(DVD)