Optional audio connections, For your reference – Panasonic DVD-A105U User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ENGLISH
Optional audio connections
Notes when connecting the optical digital audio cable
(optional)
• Remove the dust protection cap from the optical digital au
dio output and connect the cable firmly so that the configu
rations of both the cable and the connector match.
• Keep the dust protection cap and to protect against dust al
ways reattach the cap when not using the connector.
Concerning the audio output from the unit’s optical/coax-
ial digital audio output connector
Disc
Sound
recording
format
Optical/coaxial digital audio
output from connector
DVD
Dolby Digital
(AC-3)
Dolby Digital bitstream
(2-5.1ch)or PCM (2ch)
(48 kHz/16 bit)*'
Linear PCM
(48/96 kHz
16/20/24 bit)
Linear PCM (2ch)
(48 kHz sampling/16 bit only)*^
or no output*'
Video
CD
MPEG 1
PCM
(44.1 kHz sampling)
CD
Linear PCM
Linear PCM
(44.1 kHz sampling)
*^The type of audio output from the connector can be select
ed by the initial settings. (See page 76.)
=^^Sound having 96 kHz sampling is converted into 48 kHz
sampling when it is output from the unit’s optical/coaxial
digital audio output connector.
For your reference:
•
Dolby Digital (AC-3) is a digital sound compression tech
nique developed by the Dolby Laboratories Licensing Cor
poration.
Supporting
5.1-channel
surround
sound,
as
well
as
stereo
(2-channel)
sound,
this
technique
enables
a large quantity
of sound data to be efficiently recorded on a disc.
• Linear PCM is a signal recording format used in CDs. While
CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in
48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you will
obtain the full benefit of Pro Logic from the same DVD mov
ies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Caution for the optical/coaxial digital audio output
connector:
•When connecting an amplifier (with an optlcal/co-
axial digital input connector) which does not con
tain the Dolby Digital (AC-3) decoder, be sure to
select “PCM” at “2 Dolby Digital” of the initial set
ting “7 Digital Audio Output”.
(See page 76.)
•Otherwise any attempt to play DVDs may cause such
a high level of noise that it may be harmful to your
ears and damage your speakers.
•Video CDs and CDs can be played as they would nor
mally be played.
Manufactured
under
license
from
Dolby
Laborato
ries. “Dolby” and the double-D symbol are trade
marks
of
Dolby
Laboratories.
Confidential
Unpub
lished
Works.
©
1992-1997
Dolby
Laboratories,
Inc. All rights reserved.
Fabriqué sous licence de Dolby Laboratories. “Dol
by”, “Pro Logic” et le symbole double-D sont des
marques
commerciales
de
Dolby
Laboratories.
Projet non publié confidentiel. © 1992-1997 Dolby
Laboratories, Inc. Tous droits réservés.
Fabricado bajo licencia de los Laboratorios Dolby.
“Dolby”, “Pro Logic” y el símbolo de doble D son
marcas registradas de los Laboratorios Dolby. Tra
bajos
Confidenciales
No
Publicados.
@1992-1997
Dolby Laboratories, Ine. Todos los derechos están
reservados.
26