Leica Geosystems SKI-Pro - Manual (Page 11)

Installation 11 Getting Started with SKI-Pro-2.5en
Installation Instruction
SKI-Pro is delivered on a CD-ROM. If you do
not have a CD-ROM drive you can order the
installation on floppy diskettes separately.
To install SKI-Pro from CD-ROM:
Insert the CD-ROM labelled “GPS System 500SW”.
The install shield will start automatically and guide you
through the installation process.
During the installation you are given the following option to
install: Typical or Compact. If you choose Typical all
components including the optional components will be
installed. This option is recommended in most cases.
Choose Compact only if you are always using SKI-Pro
without the software protection key (dongle) and want to
save diskspace.
Older version of SKI-Pro already installed
If you have an older version of SKI-Pro already installed
on your computer all database information such as
Projects, Coordinates Sets and Coordinate Systems will
be updated automatically.
Database information from SKI 2.3 or earlier will
NOT be updated automatically. To update SKI
2.3 (or earlier) Projects you can either re-import
raw data and process them again or you can import final
coordinates or baselines via SKI ASCII files.