Installation – Leica Geosystems SKI-Pro User Manual
Page 10

Installation
10
Getting Started with SKI-Pro-2.5en
Installation
Installing SKI-Pro is a simple process. This brief chapter
explains everything you need to know regarding installa-
tion.
System requirements:
The computer and system software you intend to use with
SKI-Pro must meet the following minimum requirements.
Note that SKI-Pro works best with the recommended
requirements.
The operating system must be one of the following:
Windows 98, Windows 2000, Windows NT 4.0 (or later),
Windows ME or Windows XP.
Internet Explorer 4.0 or higher is required.
Minimum Hardware requirements:
•
PC with Pentium processor 133 Mhz
•
32 MB RAM
•
100 MB free space on harddisk (for typical
installation)
•
RS232 COM port
•
Parallel Port (for software protection key)
•
CD-ROM drive
•
Mouse installed
Recommended Hardware requirements:
•
PC with Pentium processor 500 Mhz or faster
•
128 MB RAM
•
300 MB free space on harddisk
•
RS232 COM port
•
Parallel Port (for software protection key)
•
CD-ROM drive
•
Mouse installed
Before you install:
Ensure that your computer and software conform to at
least the minimum requirements as outlined above.
SKI-Pro requires at least 100 MB of free disk space. The
programs on the installation CD are compressed and will
be expanded during installation.