DVR systems DVR31xxH Series - Manual (Page 30)

30
4.2.2.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon“○” to select
corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
 Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)
 Stop: All channels stop recording.
Figure 4-6
4.2.2.3 Enable/disable record
Please check current channel status: ―○‖ means it is not in recording status, ―●‖ means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 4-7.
Figure 4-7
4.2.2.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
 All channel schedule record
Please highlight ―ALL‖ after ―Schedule‖. See Figure 4-8.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.