DVR systems DVR31xxH Series - Manual (Page 100)

100
Parameter Function
Baud Bit You can select corresponding baud bit here.
Parity
There are five options: none/odd/even/space/mark.
System default setup is:
 Function: Console.
 Data bit: 8
 Stop bit: 1
 Baud bit: 115200
 Parity: None.
7.3.2.5 Network
Network interface is shown as in
X462H462H462H
Figure 7-32
X
.
Figure 7-32
Please refer to the following sheet for detailed information.
Parameter Function
Ethernet Please select the network card first.
DHCP Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
UDP Port Default value is 37778.
Max Connection Network user max amount. The value ranges from 0 to 10.
O means there is no user can access current device.
Remote
Host Multiple
cast
group  Set MULCAST address and port.
 Enable MULCAST function.