CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 105)

9145E NID Software User’s Manual Utilities
Static ARP Table
90
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and
assign them to a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries
are available.
From the Utilities menu, type 7 and press Enter. The Static ARP Table screen (Figure 7-4)
opens.
Figure 7-4 Static ARP Table screen
1. To add an entry to the static ARP table, type 1 and press Enter.
• Type the IP address and press Enter.
• Type the Mac address and press Enter.
• Type the port number and press Enter.
The address information is added to the table.
2. To delete an entry from the Static ARP Table, type 2 and press Enter. The first table entry will be
highlighted. Press the Space bar to scroll through the entries. Press Enter to delete the highlighted
entry.
3. Press Esc to return to the Utilities Menu.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-1-0 V03.10(GA0014) 00:05:33
------------------------------------STATIC ARP TABLE---------------------------
IP Address MAC Address Port
--------------- ----------------- ----
92.168.1.102
45-54-25-88-74-22 User
94.148.1.156 46-57-55-81-73-21 Mgmt
45.122.4.121 44-52-44-23-76-98 Net
97.198.3.246 67-76-65-56-45-54 User
94.133.1.765 68-63-22-19-76-55 Net
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages-----------------------------------