5 network management log-in, 5 network management log-in -6 – CANOGA PERKINS 3240S SNMP Managed Fiber Optic Multiplexer User Manual

Page 48

3240S F I B E R O P T I C M U L T I P L E X E R

3240S Fiber Optic Multiplexer

4.5 Network Management Log-in

With the serial port properly connected to a terminal, powering up the 3240S or resetting the management module will cause
a series of decompressing messages to scroll down the monitor screen. Reference Figure 4-2.

The following screens will appear upon powerup:

•

Power-On Self Test (POST) - This is the opening screen regardless of system configuration.

•

BOOTP in Progress (Press 'Esc' to terminate) - This will be the next screen if BOOTP is enabled.

•

Enter Log In Password prompt - This will be the next screen if a password has been configured.

•

If BOOTP has not previously been enabled, the main meu screen will appear after the proper password has been
entered (if a user interface password has been configured). If you are entering the user interface via a modem, you
will also be required to enter the Modem password prior to accessing the Management Interface.

4-6

Figure 4-2

SNMP Management Screens