B&C Technologies SA Series Industrial - Manual (Page 48)

OPERATING INSTRUCTIONS
4-26
4. 221
5. ENTER the display now shows “COPY FROM M.CARD?”
6. Press ENTER The display now shows “COPY FROM CARD” followed by “COPY OK.”
Disabling the Advance Key
Function 225
This function disables the ADVAN key. This function toggles between enabled (YES) and
disabled (NO). Default value is enabled (YES).
Maximum Level in Spin
Function 230
This function sets the maximum water level during execution of a spin. If you do not wish
to modify the value, press RESET. If you want to modify the value, press ENTER, followed by the
new value, then ENTER again to confirm. Allowed values are from 2 to 60 cm.
Software Version
STOP + RESET
Pressing the STOP and RESET keys simultaneously displays the installed firmware
version.
Cylinder Speed INS
Pressing the INS key during execution of a wash program displays the commanded wash
cylinder speed in RPM.