B&C Technologies SA Series Industrial - Manual (Page 24)

OPERATING INSTRUCTIONS
4-2
STEP 1: Select switch F turn to “Manual”.
STEP 2: Select switch C turn to “Unload” and release.
STEP 3: Press and hold button G to open the door.
STEP 4: Unload clean items. Use button D for jog cylinder “Forward”, Use button E for jog
cylinder “Reverse”.
STEP 5: Press and hold button H to close the door.
STEP 6: To return the machine to centre position use switch C turn to “Load” and release.
NOTE:
Incase the case of needing to stop the machine (Emergency). Can press
“EMEGENCY STOP” (A)
WC03 Computer
The WC03 Computer is a powerful and programmable solid state controller. Up to 30
programs, each with up to 15 cycles can be freely programmable. In addition, the WC03 can be
programmed in 6 languages – English, Italian, German, Spanish and French. The water level can
be programmed, and is accurate to 1 cm (0.4 in). Spin speeds are fully programmable in RPM. In
the event of power failure, the operator is prompted to continue the cycle, or abort it.
C. UNLOADING WASHED ITEMS
D. PROGRAM INSTRUCTIONS