Welch Allyn Acuity Software Upgrade CD - Installation Guide - Manual (Page 2)

Copyright 2008 Welch Allyn. All rights are reserved. No one is permitted to reproduce or duplicate, in any
form, this manual or any part thereof without permission from Welch Allyn.
Welch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the
product, that may result from failure to use this product in accordance with the instructions, cautions,
warnings, or statement of intended use published in this manual.
Welch Allyn ® , Propaq ® , Acuity ® , Smartcuf ® , FlexNet ® , and Flexible Monitoring ® are registered trademarks
of Welch Allyn. ParamSet ™ is a trademark of Welch Allyn.
Rad ® and Masimo ® are trademarks and/or registered trademarks of Masimo Corporation
Software in this product is Copyright Welch Allyn or its vendors. All rights are reserved. The software is
protected by United States of America copyright laws and international treaty provisions applicable
worldwide. Under such laws, the licensee is entitled to use the copy of the software incorporated with
this instrument as intended in the operation of the product in which it is embedded. The software may not
be copied, decompiled, reverse-engineered, disassembled or otherwise reduced to human-perceivable
form. This is not a sale of the software or any copy of the software; all right, title and ownership of the
software remain with Welch Allyn or its vendors.
For information about any Welch Allyn product, call the nearest Welch Allyn representative:
This device complies with Part 15 of the FCC rules and with the rules of the Canadian ICES-003. Operation
is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Caution! Changes or modifications not expressly approved by Welch Allyn could void the purchaser’s
authority to operate the equipment.
Manual Part Number 810-2878-00 Rev A, 09/2008
Welch Allyn
8500 SW Creekside Place
Beaverton, Oregon 97008-7107
www.welchallyn.com
Printed in USA
USA 1 800 289 2501
+ 1 503 530 7500
Australia + 6129 638 3000
800 074 793
Canada 1 800 561 8797 China + 86 216 327 9631
European Call Center + 353 46 906 7790 France + 3315 569 5849
Germany + 49 747 792 7186 Japan + 8133 219 0071
Latin America + 1 305 669 9003 Netherlands + 3115 750 5000
Singapore + 656 419 8100 South Africa + 2711 777 7555
United Kingdom + 44 207 365 6780 Sweden + 46 85 853 6551