Welch Allyn CardioPerfect Workstation ABP Module - User Manual User Manual
Cardioperfect workstation, Abp module - user manual
Table of contents
Document Outline
- Warranty, Service, and Spare Parts
- General information
- Intended use
- Indications
- Contraindications and considerations
- 1. Getting started
- 2. Recording an ABP test
- 3. Viewing an ABP test
- 1. In the patient list, select the patient whose test you want to view. The tests that have been recorded for that patient are listed in the test list.
- 2. From the test list, select the ABP test that you want to see. ABP tests are indicated with . The ABP module is started automatically, and the test is displayed in the workspace.
- 1. Right click on the measurement that you want to assign to the sleeping period.
- 2. In the shortcut menu, click Set asleep. A gray shade is added to the measurement to indicate that the patient was asleep when this measurement was taken.
- 1. In the Measurements view, click the measurement that you want to hide.
- 2. Right click on the measurement. In the shortcut menu, click Exclude. The measurement number is put between brackets to indicate that this measurement is not used in the test at the moment. The measurement is not used in any of the measurements or graphs
- 3. Click Include to make the measurement part of the test again.
- 1. Right click on the graph.
- 2. In the shortcut menu, click Comparison.
- 3. In the Comparison dialog box select the test with which you want to compare the current test and click OK.
- 4. The graphs for both tests are shown in the Trends view window. To return to the current test, click Comparison in the shortcut menu and click on the selected test.
- 1. Position your mouse near the area that you want to enlarge.
- 2. Click your mouse button and keep it pressed. When you move the mouse from the top left corner to the bottom right corner of the graph, a square is drawn.
- 3. Drag the square over the area that you want to enlarge. The area is enlarged.
- 4. Interpreting an ABP test
- 5. Printing an ABP test
- 6. Customize the ABP module
- 1. Use Notepad to open the file abp.txt. As a default, this file is located in C:\program files\cardio control\mdw\modules\resources\0009 (English) or \0013 (Dutch).
- 2. Edit, add and delete the statements according to your own preferences.
- 1. Type the name of the new category on the first position of a new line.
- 2. Enter the statements you want to add to this category on new lines, make sure that each statement indents one character.
- 7. Troubleshooting
- 8. Installing the ABP module
- 9. Function keys