Welch Allyn CardioPerfect Workstation ABP Module - User Manual - Manual (Page 31)

CardioPerfect Workstation
ABP Module - User Manual
DIR 80012332 Ver. E 31 / 40
6.3 ABP settings- Printing tab
Use the Printing tab to select the formats that you want to use for the Print selected
formats function.
The Printing tab contains the following information:
Default report templates
Here, you can select the formats that you want to print when you use the Print selected
formats function. You can select multiple formats.
Print after the measurements are read back from the device
If selected the ABP test is automatically printed when the measurements are read back
from the device. The formats that are selected in the Default report templates area are
printed.
6.4 ABP settings- Advanced tab
Use the Advanced tab to select the Recording device and the COM port for the ABP
recorder.
The Advanced tab contains the following information:
Recording device
Enable the ABPM 6100, the ABP Perfect or both. If you have
selected both a window will pop up when you want to make a new
recording in which you can select which device to use.
Connected to From this list, you can select the port to which the ABP recorder is
connected.