Welch Allyn CardioPerfect Workstation ABP Module - User Manual - Manual (Page 19)

CardioPerfect Workstation
ABP Module - User Manual
DIR 80012332 Ver. E 19 / 40
3. Click Include to make the measurement part of the test again.
Delete a measurement
When a measurement or event is not valid, you can delete it from the test.
To delete a measurement:
1. In the Measurements view, right click on the measurement.
2. In the shortcut menu, click Delete. The measurement is deleted from the test. It is not
used in any of the views any longer.
3.5 Hourly intervals view
The Hourly intervals view displays the average of a number of values and their
corresponding standard deviations at intervals of 1, 2, 3, 4, 6 or 8 hours.
Information
The averages of the following values are displayed:
Systolic pressure
Diastolic pressure
Heart rate
The percentage of successfully completed measurements is also displayed.
Working with the Hourly intervals view
In the Hourly intervals view, you can change the intervals for which the values are
displayed.
To change the intervals for which the values are displayed:
Click on one of the interval buttons at the top of the Hourly interval view. The interval is
changed.