Welch Allyn CardioPerfect Workstation ABP Module - User Manual - Manual (Page 32)

CardioPerfect Workstation
ABP Module - User Manual
DIR 80012332 Ver. E 32 / 40
Use safe
initialization Use this option if the ABP Perfect recorder has problem
communicating with the ABP program.
Max. inflation
pressure Allows you to select the maximum pressure that the unit will inflate
the cuff to in mmHg
Enable start button If selected a measurement can be manually started with the start
button. If not, this can only be done in the first 30 minutes.
Auto erase When you select this option, the measurements are automatically
erased from the device after storing them into the database.
6.5 Protocols
A protocol is an important part of the ABP module. It contains information about when the
ABP recorder must record a measurement.
A protocol contains a number of stages. Each stage contains the following information:
Start time: the time the stage becomes active.
Time interval: time in minutes between two measurements.
Measurements time interval (minutes): The interval in minutes between successive
measurements recorded in this stage.
Buzzer: whether the buzzer should play a sound when a recording is made. This way,
the patient can prepare himself and reduce the possibility of an error measurement. If
an error measurement occurs, a repeated measurement is taken at exactly 3 minutes
after the error measurement.
You can add and edit protocols in the Protocol editor.