Welch Allyn Holter System - User Manual - Manual (Page 24)

20 Directions for Use Welch Allyn Holter System
5. Start the Holter software application and select Test Startup.
6. If the patient has a previous recording, click Search. A patient list displays.
• Use the fields at the top of the patient list to filter your search.
• Select a patient.
7. Type or select all appropriate information.
8. Click Next. The Recorder Selection window will display.
9. Wait for approximately 20 seconds for the serial number of the recorder to appear in
the Recorders in Range window.
10. Click Next. (If no number displays, click Troubleshooting.)
Caution Inserting the Physician, Technician or Ordering Physician information
may require multiple attempts.
Caution In Windows Vista and Windows 7 operating systems, previously paired
recorders can appear in the Recorders in Range list even if the device is off.