Welch Allyn Holter System - User Manual - Manual (Page 14)

10 Directions for Use Welch Allyn Holter System
Holter System Application Directions for Use
Activating the Welch Allyn Holter Software
You must activate your Holter software within 30 days, or the software will lock itself.
The activation message displays each time you launch the software until you activate.
The best way to activate your software is through the Internet.
Activating through the Internet
1. Click the Holter icon. The activation message displays.
2. Select Yes or No.
• If you select No, a message displays reminding you that you must activate within
30 days. (Caution: after 30 days, the software will not launch.)
• If you select Yes, the system automatically activates itself and the activation screen
will not display again. This completes the activation requirement.
Activating Manually (No Internet Connection)
If the software cannot detect an Internet connection, you must activate the application
manually.
1. Launch the Holter System software. The activation message displays.
2. Select Yes or No.
• If you select No, a message displays reminding you that you must activate within
30 days. (Caution: after 30 days, the software will not launch.)
• If you select Yes, the Manual Activation dialog displays. Click the Print button. Contact
Welch Allyn Technical Support (see page ii). You will be asked to provide the
information displayed on the printout:
• User name
• Password
• PC Serial Number 1
• PC Serial Number 2
3. Once you receive the Activation Code, type it into the Activation Code box and click
Activate. The application launches and the activation screen will not display again.
This completes the activation requirement.