beautypg.com

Clock settings, Access the clock menu, Change the clock mode – Welch Allyn OAE Hearing Screener - User Manual User Manual

Page 22

background image

Clock settings

Set the date and time before using the screener. The clock should be set prior to testing

because changing the date and time after tests are saved will not change the date on the

printout.

Seasonal time changes, such as Daylight Saving Time, also require resetting the clock.

Note

If the screener is being powered on for the first time or if the battery is
completely discharged and is not charged within approximately one hour,
an Error! Reference source not found may appear. If this message
appears, reset the date and time.

Access the clock menu

1. While viewing the MAIN menu, press the DOWN control panel button.

The PROTOCOL menu appears.

2. While viewing the PROTOCOL menu, press the DOWN control panel button.

The clock menu appears with the current date and time.

Change the clock mode

The Clock Mode menu enables you to change the clock from a 24 hour mode to a 12

hour mode.

1. See "Access menus" for how to access menus.
2. On the control panel, press the DOWN button to advance to the CLOCK MODE

menu.

18 Setup

Welch Allyn

®

OAE Hearing Screener