Welch Allyn MicroTymp 3 portable tympanometric instrument - User Manual - Manual (Page 53)

Directions for use Maintenance and troubleshooting 53
2. Depress the FEED button to advance any remaining paper through the printer. Do not
pull paper backwards through the printer. Remove and discard old paper roll. Save the
black spindle that guides the paper.
3. Pull the paper lever forward.
4. Place the roll of paper behind the Printer/Charger for easier handling.
5. Insert the paper (from of the bottom of the roll) into the slot under the pinch roller,
making sure that the paper is centered.
6. Return the paper lever to its original position, and press the FEED button to advance
several inches of paper beyond the pinch roller.
7. Tighten the paper on the paper roll, reinsert the black spindle through the roll, and
place the paper roll in the paper cradle.
8. Feed the paper through the slot in the paper access cover.
9. Replace the cover by sliding the back edge into place first and lowering the front of
the paper access cover.
Note Make sure that the paper is taut before replacing the paper access cover. Loose
paper can cause printer malfunction.