beautypg.com

Change from manual to automatic printout, Change printout format, Automatic vs. manual printout (switch #1) – Welch Allyn MicroTymp 3 portable tympanometric instrument - User Manual User Manual

Page 45

background image

Directions for use

Printing 226-Hz results

45

Change from manual to automatic printout

Automatic vs. Manual Printout (Switch #1)

Change printout format

Use Switches #2 and #3, located on the bottom of the Printer/Charger, to change printout
format. Printout options are shown below.

Auto Print

Depress the ON portion of the switch to select this option.
This causes the printout to begin automatically once the
Handle is placed in the well, and data transfer is complete.

Manual Print

Depress the OFF portion of the switch to select this option.
This causes the printout to begin only when the PRINT button
is depressed.

1

2

3

4

OFF

1

2

3

4

OFF

Note

In the manual mode, a beep will occur as a reminder that data has been
transmitted; however, it is not necessary to wait for the beep before pressing
the PRINT button.

1

2

3

4

OFF

1

2

3

4

OFF

1

2

3

4

OFF

OFF

1

2

3

4

Tympanogram Only
(Switch 3)

Tympanogram and
Data (Switch 3)

Messages

(Switch 2)

No messages
(Switch 2)