Vintage Cellars FGD-0400 - Manual (Page 97)

Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers. You may need to use the Special
Dialing Codes below.
Special Dialing Codes Summary
Code 1: Numeric pager type
Code 2: Wait for answer
Code 3: Change to Touch-Tone
Code 4: Pause
Code 5: Star (*)
Code 6: Pound (#)
Description Touch-Tone Command
Setting a phone number S(7) + T(8) + (entry 1–4) + (telephone
number) + #
Description Touch-Tone Command
Reciting a phone number W(9) + T(8) + (entry 1–4)
Record and Play Custom Voice Messages
The following commands will allow you to record and play
back custom voice messages for the ID message (0) and
each zone (1–4).
Description Touch-Tone Command
Record a Message S(7) + M(6) + (entry 0–4)
Description Touch-Tone Command
Play a Message W(9) + M(6) + (entry 0–4)
Control the Relay Output
The following commands will allow you to check the status
of the relay output and to toggle the Relay Output On and
Off.
Description Touch-Tone Command
Reciting the Output Status W(9) + R(7) + O(6)
Description
Touch-Tone Command
Switching the Output S(7) + R(7) + O(6)
Chapter 6: Acknowledgment, Status Report & Remote Access
94