beautypg.com

Vintage Cellars FGD-0400 User Manual

Page 107

background image

Chapter 8: Controlling the Output

104

4. Press the ENTER key.

ENTER

PM

The 400 will say “OK” and recite a description of the mode
selected, such as “Automatic on Zone 1” or “Manual.” Note that
when Mode * is selected, the 400 will simply say “Automatic on
Alarm,” meaning that the output will automatically turn on when
any alarm occurs.

8.1.2 To play back the programmed Output Mode:

1. Press WHAT IS.

WHAT

IS

2. Press OUTPUT.

OUTPUT

PAUSE

AM

The 400 will recite the programmed output mode.

8.2 Switching The Output Using The Keypad

When programmed for Manual mode, the command to switch the
output is:

SENSOR ON/OFF + OUTPUT.

SENSOR

ON/OFF

OUTPUT

PAUSE

AM

The 400 will respond “The output is on/off” to indicate the state
of the output.

Note: If the 400 says “Error,” the output is not programmed for
manual mode.