Chapter 3: quick start, 1 the local keypad, 2 preparation for programming – Vintage Cellars FGD-0400 User Manual

Page 35

Chapter 3: Quick Start

This section presents a useful guide for first-time programming
of the Model 400. Follow instructions for installation before
attempting to program the Model 400. Refer to Chapter 2:
Installation.

3.1 The Local Keypad

Programming is accomplished using the local keypad (shown
below, Figure 3-1). Notice that a single key has several functions
assigned to it; programming results are determined by the order in
which keys are pressed.

Individual keystrokes are illustrated to show programming
steps in the correct order. If you make a mistake by entering the
wrong key, do not press another key until you hear the message
“Error 1.” Then, start over with the first key in the programming
sequence.

��

��
��
��

��

�

��

�

��

�

��

��
��
��

��
��
��
��

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

� � � � � � � � � � � � � � � � � � � � � � � �

��

Figure 3-1. The Model 400 Keypad

3.2 Preparation for Programming

Read complete instructions in Chapter 2: Installation, and make
sure to follow these three steps first:

1. Plug the AC adapter into the 120 VAC outlet.

2. Install the batteries.

3. Connect the Model 400 to a telephone line.