Vintage Cellars Le Cache Delivery and Inspection Instructions - Manual

L E C A C H E P R E M I U M W I N E C A B I N E T S
-3-
I. I M P O R T A N T N O T E S
• WHEN TAKING DELIVERY OF YOUR WINE CABINET, FOLLOW THE INSPECTION
PROCEDURES DESCRIBED IN CHAPTER III.
• WAIT 24 HOURS BEFORE PLUGGING IN AND OPERATING YOUR CELLARPRO
COOLING UNIT.
• THE COOLING UNIT SHOULD BE PLUGGED INTO AN OUTLET CONNECTED TO
A 15-AMP CIRCUIT
• IF THE WALL OUTLET IS DIRECTLY BEHIND THE WINE CABINET, USE AN
EXTENSION CORD (GROUNDED; 14 GAUGE OR THICKER) AND COIL THE
EXCESS AT THE TOP OF THE CABINET SO THAT YOU WON’T NEED TO MOVE
THE WINE CABINET IN THE EVENT THAT THE COOLING UNIT NEEDS TO BE
REPLACED.
• WE RECOMMEND PLUGGING THE COOLING UNIT INTO A SURGE PROTECTOR
(MINIMUM OF 15-AMPS) TO PROTECT THE ELECTRICAL COMPONENTS FROM
POWER SURGES OR SPIKES.
P L E A S E N O T E!
UNTIL YOU’VE LOADED BOTTLES INTO YOUR WINE CABINET, DO NOT OPEN
BOTH DOORS AT THE SAME TIME. THE DOORS ARE EXTREMELY HEAVY AND
WHEN BOTH DOORS ARE OPENED, THE CABINET CAN TIP FORWARD IF THE
CABINET IS EMPTY.