Sensaphone – Vintage Cellars FGD-0400 User Manual

Page 110

Sensaphone

Model 400 User’s Manual

107

��
��

��

��
��

��

�

��

��
��

�

Step 4: Program the Thermostat.

Refer to the manufacturers instructions for programming the
thermostat. Be sure to program settings for both normal and
vacation modes.

Controlling the Thermostat

The operating mode of the thermostat (normal/vacation) can be
controlled at the Model 400 keypad or remotely via Touch-Tone
comands. Both methods are described below:
Keypad commands:

1) To enable Vacation Mode, press the [SENSOR ON/OFF] key,
then the [OUTPUT] key. The unit will respond by saying “ON”
to indicate that Vacation Mode is set. The Suitcase icon

will appear and blink on the thermostat LCD.

2) To enable Normal Mode, press the [SENSOR ON/OFF] key,
then the [OUTPUT] key. The unit will respond by saying “OFF”
to indicate that Normal Mode is set. The Sun

or Moon

icon will appear on the thermostat LCD.