Vintage Cellars FGD-0400 - Manual (Page 50)

3. Press the number key (from 1 to 4) representing the telephone
number you want to erase.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. Press ENTER. The Model 400 will say “Number # erased.”
ENTER
PM
4.4 Tone or Pulse Dialing
The Model 400 can dial out in pulse or Touch Tone™. Select the
type of dialing, in either pulse or tone, depending upon the type of
service provided by your telephone company. The default is tone.
To program for either pulse or tone:
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press PHONE NUMBER T/P.
PHONE
NUMBER
T/P
The Model 400 will respond: “Tone” to indicate that tone dialing
is enabled, or “Pulse” to indicate that pulse dialing is on and
enabled.
3. Repeat key sequence to switch between settings.
4.5 Special Dialing
The Model 400 has provisions for special dialing sequences.
Special dialing sequences allow:
• Dialing that requires an access number to connect with an
outside line.
• Dialing that requires the pound (#) or star (*).
• Dialing to a beeper or pager.
Sensaphone
®
Model 400 User’s Manual
47