Vintage Cellars FGD-0400 - Manual (Page 67)

4.14 The Clock
The Model 400 has a built-in clock. The power-up time is 12
AM
. The clock will keep time from 12
AM
until you program the
current time. It will then keep time from your programmed time.
If the AC power fails, the clock will continue to keep time until
the battery back-up fails. It will then reset to 12
AM
when power
is restored. An incorrect time is a good indication that the power
has failed and the batteries have been expended.
4.14.1 Setting the Clock
To set the clock:
1. Press SET.
SET
2. Press CLOCK.
8
CLOCK
3. Using the number keys, enter the correct time. The Model 400
will recite the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. If the time is AM, press the AM key. The Model 400 will say
“am” If the time is PM , press the PM key. The Model 400 will
say “pm.”
Example: You want to set the clock to 9:45
AM
. Press the following
keys in the order shown:
SET + CLOCK + 9 + 4 + 5 + AM
64
OUTPUT
PAUSE
AM
ENTER
PM