Vintage Cellars FGD-0400 User Manual

Page 95

now in Touch-Tone

™

command mode. Commands are available

to perform the following functions:

• Enable and disable zones, power monitoring, and sound
monitoring

• Recite/Set High and Low alarm limits

• Recite/Set telephone numbers

• Record/Play custom voice messages

• Recite/Set the relay output

• Activate the microphone for listen-in

• Recite status report

NOTE: If a security code is enabled, the 400

will prompt you with “Enter security code.”

Enter the four-digit keypad security code plus

“

#” to enter touch-tone command mode. If

entered correctly, the 400 will respond with

“OK” and you can proceed to enter the com-

mands. If entered incorrectly, the unit will give

you one more chance. If it is incorrect a second

time, the unit will say “Error, goodbye” and

hang up.

The commands are put together based on the letters of a touch-
tone telephone. See typical telephone keypad layout below.

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

Chapter 6: Acknowledgment, Status Report & Remote Access