Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 84)

84
Status Messages
User Manual for Secura, Quintix, Practum
Calibration/Adjustment Error Messages
“The balance needs to
perform eCheck!" when eCheck is required.
“The balance needs to
be adjusted!" when isoCAL is required.
“The balance
needs to be leveled!" when leveling is required.
“Weight is too light!" when a weight that is too light is placed on the
balance during external calibration.
“Weight is too heavy!" when a weight that is too heavy is placed on the
balance during external calibration.
Leveling Error Messages
“Leveling" The balance must be leveled (for balances with
electronic level indicators only).
Balance Maintenance Error Messages
“Maintenance interval
ended" when the maintenance date set by Service has been
exceeded.
Calibration Report Error Messages
“Calibration report data
not found."
“Not able to save cal./adj.
data."
“Cal./adj. log file could
not be opened."
“USB Devices” Error Message
“The attached USB device is
not supported."