Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 55)

55
Conversion (Secura® and Quintix® only)
User Manual for Secura, Quintix, Practum
Conversion (Secura ® and Quintix ® only)
Purpose: Use this application to multiply the weight value by a user-defined factor. Division
is also possible if a factor of less than zero is selected. The selected factor is saved
to protected memory.
Example: You want to calculate the weight per unit of a sheet of paper (DIN A4).
To do so, proceed as follows:
– The weight per unit (e.g., 80 g/m
2 ) can be determined by dividing the weight
by the surface.
– The surface of a sheet of DIN A4 paper is:
0.210 0.297 = 0.06237 m 2 .
– Division by 0.06237 is equal to multiplication by reciprocal value 1 / 0.06237,
i.e., 16.03335.
– Set the factor to 16.03335 in the application.
t
Select the Menu key in any application.
t
Select the Conversion symbol in the menu.
Max 2100 g d=0.01 g
0.00
Factor
1
y The Conversion application appears.
The multiplier is displayed under Factor .
Factor
1
t
To set the factor and accuracy of the conversion, select the gray button.
Conversion
Factor Accuracy
16.03335
1
2
0
0.0
0.00
y The Conversion settings window appears.
t
On the left, enter the factor by which the weight of the sample will be
multiplied.
Select a value or select
t , enter the desired value, and confirm with l .
t
Select the accuracy of the conversion display on the right.
t
Select l to confirm.
t
Select A to zero the balance if necessary.
t
Select
w
.