Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 21)

21
Using the Balance
User Manual for Secura, Quintix, Practum
The Menu
All balance application and settings can be accessed via the balance menu.
t
To access the menu, select the Menu key located at the bottom left of the
display in any application.
y The menu appears.
Components Statistics
Mixing Weighing
1
5
2 3
7
6
8
4
1 Selected application (such as Mixing )
2 Application selection area: symbols for all available applications
(see “List of Applications in Menu" on page 22)
3 Function area
4 Back: run the most recent application.
5 Setup menu: access the balance system settings
(see “System Settings (Setup Menu)" on page 24).
6 Access the balance leveling function via electronic level indicator (Secura ® only)
(see “Leveling with Electronic Level Indicator (Secura ® )" on page 13).
7 Access the calibration and adjustment menu
(see “Calibrating and Adjusting the Balance" on page 66).
8 Switch the balance to standby mode.
Enter figures on the keypad
g Min
1 2 3
4 5 6
7 8 9
+/- 0 .
C
+ 0000000
Numbers or values can be entered for many applications or system settings (such
as a minimum value for the Checkweighing application). A keypad appears on the
display, which can be used for this purpose.
t
To enter numbers or values, touch the corresponding numbers in order.
The entered numbers appear at the top of the display.
t
To correct the most recent number, select k .
The number is deleted. Then enter the correct number.
t
To delete the entire value, select C .
t
To confirm the entry, select l .