Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 38)

38
Weighing
User Manual for Secura, Quintix, Practum
Individual Identifiers (Secura ® only)
Purpose: You can define identifiers for the following print jobs:
– Device identification (ID): printed in header of GLP printout.
– Batch ID (L ID): queried after each GLP head in GLP printout.
– Sample ID (S ID): for printouts via the
g button. This ID is queried before each
printout.
Prerequisites: – The balance must be connected to a Sartorius lab printer or PC for printouts
(see “USB Port" on page 72).
– The settings for individual identifiers can be configured in the system settings
under Identifier (see “Identifier (Secura ® only)" on page 29).
– The GLP printout can be activated in the system settings under Print function
in Manual print (see “Printout" on page 28).
Starting the Printout
Example: Configuration of system settings for printing sample ID (S ID):
Identifier – Sample ID function – Autom. increment :
t Place the sample on the weighing pan.
14.42
Max 2100 g d=0.01 g
+
t Select g to print.
1 S ID
1 2 3
4 5 6
7 8 9
- 0 .
C
y The identifier for the printout is displayed.
The displayed value can be changed if desired.
– Delete the displayed value: Select
u .
– Delete the last character: Select k .
t Select l to confirm.
y The weight value is printed. A sample printout can be seen below:
------------------
S ID
11
N + 200.21 g
S ID 12
N + 200.19 g