Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 29)

29
System Settings (Setup Menu)
User Manual for Secura, Quintix, Practum
Identifier (Secura ® only)
Identifier
Set device ID
Batch ID function
Sample ID function
Define identifiers for the printout via the g button and in the ISO/GLP printout
here. Under Printout in Manual print , the ISO/GLP printout option must be
activated.
Set device ID menu option:
The device identification (ID) is printed in the header of the GLP printout.
t To activate the device ID, select
t , enter the desired device ID, and confirm
with l .
Batch ID function menu option:
The batch ID (L ID) is queried one time in the GLP printout.
t Activate this option to print out the batch ID.
Sample ID function menu option:
The sample ID (S ID) can be printed by selecting the g button on the balance
display.
t Define settings for printing the sample ID.
– On : The sample ID is activated. This ID is queried before each printout.
– Autom. decrement : Select this option to automatically assign the sample
ID in ascending order.
– Autom. decrement : Select this option to automatically assign the sample
ID in descending order.
– Off : The sample ID is deactivated.
h
To enter and delete figures and values, e.g., for the sample ID, see “Enter figures on
the keypad" on page 21.