Rice Lake OnTrak Truck Scale Data Management - Operation Manual - Manual (Page 5)

OnTrak Manual - Introduction 1
About This Manual
OnTrak TM is a powerful scale data management program. The software tracks customer account information,
haulers, trucks, products, discounts, and inventory; and allows quick and easy report generation. It performs weigh
in/out, stored tare, and keyed tare transactions.
OnTrak can connect with most Rice Lake indicators and supports both Windows and serial printers.
Manuals can be viewed or downloaded from the Rice Lake Weighing Systems website at
www.ricelake.com .
1.0 Introduction
OnTrak uses a simple approach for processing everyday transactions. Features include:
• Weigh ticket processing
• Hauler and product information
• Report generation by criteria selection
• Customer-specific, product-specific, and job specific rates and surcharges
• Inventory management based on shipping and receiving transactions
• Scale interface
• Interface to serial and Windows printers
1.1 System Requirements
The following hardware is recommended for running OnTrak .
Minimum System Requirements
• 600+ MHz Intel compatible processor
• 1 GB of RAM
• 20 GB free hard drive space
• Microsoft ® Windows XP SP3, Vista SP2, Windows 7, or Windows 8
• RS-232 or TCP/IP connections to an indicator and printer
Recommended System Setup
• 1.0 GHz Intel compatible processor
• 1 GB or greater of RAM
• 30 GB free hard drive space
• Microsoft Windows XP SP3, Vista SP2, Windows 7, or Windows 8
• RS-232 or TCP/IP connections to an indicator and printer
Important