Rice Lake OnTrak Truck Scale Data Management - Operation Manual - Manual (Page 21)

Setting up OnTrak 17
3.4 Ticket Printing
You must specify what type of printer (Windows printer or serial printer) you are using. If using a serial printer,
you must also specify its communication settings. You can set different printers for the tickets and audits.
1. From the left pane, expand the Ticket Printing selection, if not already expanded.
2. Under Ticket Printing , select Ticket Copies .
3. In the right pane, enter the number of weight tickets to print. Mark the checkbox to print inbound tickets.
4. Under Ticket Printing , select Ticket Printer .
5. In the right pane, from the Printer Driver pull-down menu, select whether you are using a Windows printer
(Windows Printer Driver) or a serial printer (Generic Serial Printer Driver).
6. If using a Windows printer, select which printer you want to use from the Windows Printer Name
pull-down menu.
All printers installed on your computer appear in the list.
7. If using a serial printer, select whether it is connected via RS-232 or TCP/IP from the Communications
Method pull-down menu.
8. If using a serial printer, select Ticket Printer Communications from the left pane.
9. In the right pane, complete the communication options as appropriate. Selections include Comm Port ,
Baud Rate , Data Bits , Parity , and Stop Bits .
10. From the left pane, select Audit Printer .
11. In the right pane, from the Printer Driver pull-down menu, select whether you are using a Windows printer
(Windows Printer Driver) or a serial printer (Generic Serial Printer Driver).
12. If using a Windows printer, from the Windows Printer Name pull-down menu, select which printer you
want to use.
All printers installed on your computer appear in the list.
13. If using a serial printer, from the Communications Method pull-down menu, select whether it is connected
via RS-232 or TCP/IP.
14. If using a serial printer, from the left pane select Audit Printer Communications .
15. In the right pane, complete the communication options as appropriate. Selections include Comm Port ,
Baud Rate , Data Bits , Parity , and Stop Bits .
16. Click Save .
3.5 Creating Users and Permissions
When logged in as the administrator, you can create new users and set their permissions as having either
administrator or user rights. User rights disable all features except for making a weighments. The default
administrator login is shown in Table 3-3. To change the password, see Section 3.5.2 on page 18.
3.5.1 Creating a New User and Setting Their Permissions
1. From the View menu, select Users . Or, from the toolbar, click the Users button.
The Users dialog box appears.
2. Click the Add button.
The Edit User dialog box appears.
User name Administrator
Password password
Table 3-3. Default Administrator login.